ACCESSORIES
SolarSynthesis 5A 12V 6V Load on 24Hours IP67 Waterproof Solar Charge Controller for Lead-acid battery Charing and Discharging Control
- Mini Size Waterproof solar charge controller for small power system, IP67 Waterproof Rating make it suit for Outdoor Use
- Battery Voltage: 6V/12V auto; Rated Charge & Discharge Current: 5A; Maximum power of solar panel: 30W for 6V battery, or 60W for 12V battery
- Easy to install and operate; Load On 24 Hours; Smart PWM technology, high efficiency
- Prevent the battery from over charging, over discharging and Reverse discharging to solar panel during nights
- 12-months warranty and professional after-sale service within 24 hours.
SolarSynthesis Qi Certified Ultra-Thin Waterproof Wireless Charging Pad, Compatible with iPhone Xs Max/XS/XR/X/8/8 Plus,Samsung Galaxy Note9/S9/S9 Plus/S8/S8 Plus/ Note8/S7 Motorola LG (No AC Adapter)
The SolarSynthesis wireless charging pad works with all Qi compatible smartphones, including iPhone Xs Max/XS/XR/X/8/8 Plus & Samsung Galaxy Note9/S9/S9 Plus/S8/S8 Plus/ Note8/S7 & Nokia Lumia 920/1020/928/1520 & Motorola Moto Z/Moto 360 Smart Watch/Moto Droid Maxx/Droid Mini & Nexus: Google Nexus 4/5/6/7(2013) & LG Optimus Vu2/G2/G3. Simply place your device on the charger and it will charge the phone automatically.
The SolarSynthesis Wireless Charger works with all non-metal/magnetic cases less than 4mm thick.
Ultra thin design less than 4mm thick /69mm diameter / 30g is small enough to fit in your pocket or store in small spaces
Simply plug into a USB charging base (not included) and place your phone on top. The white light will illuminate to let you know it's charging. To enable the fast charge feature, use a QC 2.0/3.0 Adapter. You can still use your device while charging, and your device is always accessible so you can answer a call without having to unplug.
Unique Design is Qi certified, Ultra-thin, waterproof and shock proof and has both overvoltage and overheating protection .
The SolarSynthesis wireless charging pad complies with Qi 1.2.2 standard and works well at the ultra-low charging temperature (<4 ° C). As a result, this charger does not get hot during charging to protect your mobile phone. This also allows a high charging efficiency and ensure a charging speed as fast as possible.
How to use:
Connect the USB cable to a power source using the supplied AC adapter.
Put your mobile phone correctly on the center of the base.
Remove your mobile phone when it is fully charged.
Compatibility:
IPHONE: Iphone X / 8 / 8 Plus
SAMSUNG: Galaxy Note 5 / S6 / Edge S6 / Edge S6 + / S7 / Edge S7 / S8 / S8 + / Note 8
NOKIA: Nokia Lumia 920 / 1020 / 928 / 1520
NEXUS: Google Nexus 4 / 5 / 6 / 7 (2013)
LG: LG Optimus Vu2 / G2 / G3
SolarSynthesis 4.2A Dual USB Charger Socket Blue LED with Waterproof Spring Cover
- Water proof,High quality socket with dual USB accessory charger and sealing cap
- Charges for iPhones,mobile phone,iPads,vehicle,camera,mp3,GPS
- Has two ports both charging at 2.1 amp. A tight fitting cap protects the USB ports when not in use. All nylon construction and UV resistant
- High and Low Temperature Resistant Nylon Flame Retardant Materials
- Blue LED illuminated USB charging socket with Rubber Seals, Fits any 12V-24V Car Motorcycle Boat Marine ATV RV ect.
Specifications:
Material: ABS High Temperature Resistant Nylon Flame Retardant
Power Input: DC 12V-24V
USB Output Voltage: 5V
Output Current: 4.2A
MAX Power: 22W
No Load Power: 0.18
Product Dimension: 5.4cm x 3.7cm (2.12in x 1.46in)
Product Dimension: 2.9cm (1.14in)
Package Included:
1 X Dual Ports 4.2A USB Charger with Blue LED
2 X Blue Connector Cap
SolarSynthesis 200mmx170mm 6 Watt 18 Volt Monocrystalline Solar Cell Panel Module
- High-efficiency encapsulated solar panel, providing enough power for DIY
- Power small motors or other loads; perfect devices for science project
- Portable, compact and stylish size with solid attractive casing
- UV treated surface and durable weatherproof PCB board
- Dimension: 200mm x 170mm/ 7.87inch x 6.69inch (L*W)
SolarSynthesis 10 Watt Monocrystalline Photvoltaic Pv Solar Panel Module for 12v Battery Charging
- SolarSynthesis 10 Watt 10w Monocrystalline Photovoltaic PV Solar Panel Module 12V Battery Charging
- Delivered Ready for Connection & Fast and Easy Installation With Pre-Drilled Hole. Each Solar Panel Comes With Long 90cm Cable Quick Connectors.
- Basic Component For Off-Grid Solar Panel12/24V/36/48VSystem , Caravan, RVS, Cars ,Boats, Green House Solar system,Solar Light ,Solar Pump Etc
- 5 years workshop warranty and 20 years output warranty
- High Modules Conversion Efficiency 10W Mono Solar Panel Provides Up to 10W Power,If You Have Any Quality Problems Please Contact us
SolarSynthesis SSYN-1270 - 12 Volt/7 Amp Hour Sealed Lead Acid Solar Rechargeable Battery with F1 Connector
- Dimensions: 5.95" L x 2.56" W x 3.70" H
- Sealed construction requires no maintenance
- Solar rechargeable designed to work with SolarSynthesis charge controller
- Replaces all brands with similar specifications and dimensions
- Replacement battery for SuperCharge7 or to run in parallel for a SuperCharge14
SolarSynthesis SSYN-12350NB - 12 Volt/35 Amp Hour Sealed Lead Acid Solar Rechargeable Battery with Nut-Bolt Connector
Sealed construction requires no maintenance
Solar rechargeable designed to work with SolarSynthesis charge controller
Replaces all brands with similar specifications and dimensions
SolarSynthesis 60A MPPT Solar Charge Controller MPPT-60A
Features:
- 12V/24V/36V/48V Auto detect
- Intelligent maximum power point tracking technology
- Suitable for sealed lead acid, vented gel and lithium battery types
- Multi-function back lit LCD display
- Fault reference codes for system troubleshooting
- Automatic forced air cooling fan turns on at 40C and off at 35C
- Die-cast aluminum design assuring excellent heat dissipation
Specification:
- Overcharge protection voltage: 60V
- Maximum Power Current: 60A
- Max PV Input Power: 12V-720W; 24V-1440W; 36V-2100W; 48V-2800W
- Max PV Input Voltage: 12V System (20-80V); 24V System (37-105V); 36V System (50-160V); 48V System (72-160V)
- Terminal: 10AWG
- Weight: 3.1 lbs. (1.4Kg)
- Max efficiency >98.1%
- PV Utilization > 99%
Mounting Hardware (6"), Solar Powered Charging Station
Mounting Hardware (8"), Solar Powered Electrical Outlet
Mounting Hardware for permanent installation of your SuperCharge18, SuperCharge35 or SuperCharge35 Plus Solar Powered Charging Station. The mounting hardware kit includes a mounting base, an anchor bolt and a two part epoxy to secure the Charging Station to the post base.
